Final Video

New Nose Cone

When our rocket landed after our first test launch, the nose cone was dented. We took advantage of this situation and remade the cone using a parabolic shape.

Finished Rocket

The finished version of Rocket Balboa

Testing - Day 4

Although our angles to find the height the height were horrific, we were pleased with our results. We are not exactly sure how high our rocket went, but we will keep testing to find out more. Rocket Balboa received multiple impacts, that slightly damaged the nose cone. We added more clay and tape to the cone, to add a parabolic shape.

Results

 

	WaterRocketSim Prototype	Glenn Research Center
DATA SHEET
Flight One Flight Two Body: Payload Height (cm): 12.7                Nozzle Radius (cm): 5.08               Fairing: No Fairing radius (cm): 0 Nose Cone: Shape: Conical Material: Solid Balsa Propulsion: Water (liters): 0 Pressure (KPa): 200 Fin Design: Fin Height:12.7 cm Fin Shape: Trapezoidal                                 Number of Fins: 3 Fin Dimensions: Width: 12.7 cm;            Length: 12.7 cm Body: Payload Height (cm): 12.7 Nozzle Radius (cm): 5.08               Fairing: No Fairing radius (cm): 0 Nose Cone: Shape: Conical Material: Solid Balsa Propulsion: Water (liters):0                             Pressure (KPa): 500 Fin Design: Fin Height: 5                                                Fin Shape: Trapezoidal                             Number of Fins: 3                                            Fin Dimensions: Width: 12.7 cm;     Length: 12.7 cm Launch Stats: Max Altitude (m): 9m Max Velocity (m/s): 14 m/s Launch Stats: Max Altitude (m): 24 m Max Velocity (m/s): 39 m/s

Rocket Construction Day 3

We successfully attached the nose cone to our rocket, and reinforced the attachment of the fins. Unfortunately, we were unable to get a picture of our rocket.

The Fins!

We made fins using parallelogram-shaped pieces of cardboard. We added pink duct tape for support and style.